Description:
The FWC-FSLC-PULL series are the Napco series of addressable manual pull stations that provide a fast and practical means of manually initiating a fire alarm signal. Resetting of the pull station requires either a Cat 30 key or a 1/8" hex key (depending upon the model used). An alarm condition is actuated by pulling down on the handle of the FWC-FSLC-PULL and FWCFSLC-PULLK single action models.
On the dualaction FWC-FSLCPULL2K, the Lift and Pull cover must be lifted before pulling down on the pull station handle.
Once the pull station is activated, the handle cannot be put back into a normal standby condition without using the key operated reset feature. The FWC-FSLC-PULL series is electronically addressable and includes a bi-colored status LED. The LED blinks green indicating normal communication with the DCP compatible SLC loop. When an alarm condition is actuated by pulling the handle, the LED will latch red to indicate the alarm condition.
Features:
Home
