NAPCO
NAPCO

8 ZN EXPANSION MODULE820025

GEMCEZM8

8 ZN EXPANSION MODULE820025


You are currently shopping as a GUEST.

Login



Login




Previous Page


Product Info Long

Napco Security (Gemini Commercial) GEM-EZM8 - 8 Point Conventional Zone Expander.

The capacity of the GEMC-Series control panels may be expanded through the use of a GEMC-EZM8 Zone Expansion Module.

Each GEMC-EZM8 module provides up to 8 additional zones, and may be configured to provide for either 4 zones or 8 zones.

Using either configuration, several GEMC-EZM8 modules may be combined as necessary to supply the required number of zones to the GEMC-Series control panel. Refer to the GEMC-Series control panel installation instructions (WI1653) for wiring requirements.

Features:
  • 8-point expansion module
  • The capacity of the FIREWOLF Series control panels may be expanded through the use of a GEMCEZM8 Zone Expansion Module.
  • Each GEMCEZM8 module provides up to 8 additional zones, and may be configured to provide for either 4 zones or 8 zones.
  • Using either configuration, several GEMCEZM8 modules may be combined as necessary to supply the required number of zones to the FIREWOLF Series control panel.
Specifications:
  • Input Power: 12.5 - 7.5VDC, 60mA.
  • Zone Loop current: 4.7mA nominal, 5.5mA when shorted.
  • Maximum Zone Loop Resistance: 300 ohms.
  • 2.2K End of line resistor (UL Listed part number EOL2.2K required in Fire applications).
  • PGM Output (Active low): 5mA, 12V. Connect only to power-limited circuits less than 14VDC. Use only in Burglary applications.
  • Ground Faults Detected: 1.25Kohm to ground or less.

Product Documents

Product Data Sheet

GEMCEZM8-DataSheet.pdf


This product is typically included with the following Kits (and items)

Fire BUS and UL Wireless
info

Addressable and Modules
info



NAPCO

8 ZN EXPANSION MODULE820025

GEMCEZM8

8 ZN EXPANSION MODULE820025


You are currently shopping as a GUEST.

Login



Login





Previous Page

Product Info Long

Napco Security (Gemini Commercial) GEM-EZM8 - 8 Point Conventional Zone Expander.

The capacity of the GEMC-Series control panels may be expanded through the use of a GEMC-EZM8 Zone Expansion Module.

Each GEMC-EZM8 module provides up to 8 additional zones, and may be configured to provide for either 4 zones or 8 zones.

Using either configuration, several GEMC-EZM8 modules may be combined as necessary to supply the required number of zones to the GEMC-Series control panel. Refer to the GEMC-Series control panel installation instructions (WI1653) for wiring requirements.

Features:
  • 8-point expansion module
  • The capacity of the FIREWOLF Series control panels may be expanded through the use of a GEMCEZM8 Zone Expansion Module.
  • Each GEMCEZM8 module provides up to 8 additional zones, and may be configured to provide for either 4 zones or 8 zones.
  • Using either configuration, several GEMCEZM8 modules may be combined as necessary to supply the required number of zones to the FIREWOLF Series control panel.
Specifications:
  • Input Power: 12.5 - 7.5VDC, 60mA.
  • Zone Loop current: 4.7mA nominal, 5.5mA when shorted.
  • Maximum Zone Loop Resistance: 300 ohms.
  • 2.2K End of line resistor (UL Listed part number EOL2.2K required in Fire applications).
  • PGM Output (Active low): 5mA, 12V. Connect only to power-limited circuits less than 14VDC. Use only in Burglary applications.
  • Ground Faults Detected: 1.25Kohm to ground or less.

Product Documents

Product Data Sheet

GEMCEZM8-DataSheet.pdf


This product is typically included with the following Kits (and items)

Fire BUS and UL Wireless
info

Addressable and Modules
info