ALULA
ALULA

CONNECT 360 MOTION SENSOR

RE659

CONNECT 360 MOTION SENSOR


You are currently shopping as a GUEST.

Login



Login




Previous Page


Product Info Long

Alula RE659 - Ceiling-Mount Wireless 360° Motion Detector, 40-Foot Range (for Connect+ Panel).

The Alula RE659 is a wireless Connect+ encrypted, ceiling-mount, 360 Degree motion sensor designed for the Alula Connect+ control panel. With a range of up to 40 feet diameter, the RE653 protects indoor areas and goes into alarm when motion is sensed.

To enroll the RE659, begin by entering the serial number into the security panel. Alternatively, the sensor can be enrolled by placing the panel into enrollment mode, and then pulling the battery tab or tampering the device.

To install the RE653, begin by screwing two #8 screws into the ceiling, leaving 1/4 inch of thread exposed. Next, slide the back plate over the screws and rotate the back plate. Screw the third #8 screw through the wall tamper into the ceiling, ensuring that the wall tamper screw is attached to something solid. Tighten all screws until snug. Then, insert the square nut into the square slit of the cover and start threading the #4 screw into the side of the cover. Close the cover and conduct a walk test. After testing, take the unit out of walk test mode and close the cover again. Finally, finish threading the #4 screw until it is snug.

Features:
  • 360° detection range with 62 distinct detection zones
  • Range up to 40 feet in diameter
  • Selectable pulse count 2 or 4
  • Designed for commercial applications
  • 5 year warranty

Product Documents

Product Data Sheet

RE659-Datasheet.pdf


This product is typically included with the following Kits (and items)

Wireless Devices
info



ALULA

CONNECT 360 MOTION SENSOR

RE659

CONNECT 360 MOTION SENSOR


You are currently shopping as a GUEST.

Login



Login





Previous Page

Product Info Long

Alula RE659 - Ceiling-Mount Wireless 360° Motion Detector, 40-Foot Range (for Connect+ Panel).

The Alula RE659 is a wireless Connect+ encrypted, ceiling-mount, 360 Degree motion sensor designed for the Alula Connect+ control panel. With a range of up to 40 feet diameter, the RE653 protects indoor areas and goes into alarm when motion is sensed.

To enroll the RE659, begin by entering the serial number into the security panel. Alternatively, the sensor can be enrolled by placing the panel into enrollment mode, and then pulling the battery tab or tampering the device.

To install the RE653, begin by screwing two #8 screws into the ceiling, leaving 1/4 inch of thread exposed. Next, slide the back plate over the screws and rotate the back plate. Screw the third #8 screw through the wall tamper into the ceiling, ensuring that the wall tamper screw is attached to something solid. Tighten all screws until snug. Then, insert the square nut into the square slit of the cover and start threading the #4 screw into the side of the cover. Close the cover and conduct a walk test. After testing, take the unit out of walk test mode and close the cover again. Finally, finish threading the #4 screw until it is snug.

Features:
  • 360° detection range with 62 distinct detection zones
  • Range up to 40 feet in diameter
  • Selectable pulse count 2 or 4
  • Designed for commercial applications
  • 5 year warranty

Product Documents

Product Data Sheet

RE659-Datasheet.pdf


This product is typically included with the following Kits (and items)

Wireless Devices
info