Product Info Long
Napco Security (Firewolf) FWC-FSLC-CZM - Addressable SLC Single Module Allows the Monitoring of Dry Contacts Such as Pull Stations and Two-Wire Conventional Smoke Detectors.
This Napco Conventional Zone Module is designed for use with an analog addressable Fire Alarm system. Up to 127 devices can be placed on a single SLC loop. The device address is uniquely stored on an onboard EEPROM chips.
The CZM module allows the panel to interface and monitor two-wire conventional detectors or pull stations. Each FSLC-CZM transmits the status of one zone of devices (25 maximum per zone) back to the panel. It supervises the power supply as well as the entire zone of devices. Status conditions are reported as normal, open or alarm.
All 2-wire smoke detectors must be UL Listed as compatible to be interfaced with the FWC-FSLC-CZM. The interrupt-driven communication protocol combines maximum communication reliability and fast response to emergency conditions. The module has a single bi-colored LED to indicate device status. It fits into a standard 4" square or double-gang electrical back box.
Features:
- Provides an address point for a zone of up to 25 conventional smoke detectors
- Blinks green when polled; latched on red (controlled by panel) when activated
- Device address can be programmed with a handheld programmer. Device address ranges from 1 to 127
- Compatible with Class B and Class A wiring
- Auxiliary power source provides power for the zone of detectors
- Compatible with conventional detectors
- Dimensions: 4.2"W x 4.7"H x 0.85"D
Specifications:
- The contractor shall furnish and install where indicated on the plans, Conventional Zone Module FWC-FSLC-CZM modules. The modules shall be UL Listed and compatible with the Napco FIREWOLF Analog Control Panel Protocol. The device address shall be electrically programmable and stored in an EEPROM. A bi-colored LED shall indicate device status.