Product Info Long
Napco Security (Gemini Commercial) GEMC-OUT8 - PGM Output Module For 8 Open Collector Program Outputs, Suitable for Commercial Fire and/or Burg Applications.
The GEMC-OUT8 is an 8-channel active low interface accessory for use with GEMC-Series control panels.
It may be used with all control panels, regardless of housing. It connects onto the remote panel Fire bus or models GEMC-BM (WI1701) or GEMC-BM/PS (WI1700) along with such other accessories as keypads and zone expansion modules. Up to 11 GEMC-OUT8 units may be used.
This module provides 8 independent programmable active low unsupervised external outputs for controlling bells, door latches, lights, supplemental lights and other similar devices. The panel controls the activation of each external output. Refer to the GEMC-Series installation instructions (WI1653) or the installation instructions of the control panel in use for wiring requirements in UL-listed applications.
The GEMC-OUT8 provides 8 "active low" open collector outputs. Each output will provide a "floating" ground for the load device. In a normal state, the output will float at approximately 12VDC relative to ground. When active, the output will drop to a low state of approximately 1-4VDC, effectively providing a ground for the load device, which will then activate.
Specifications:
- Electrical Ratings
- Input Power: 12.5 - 7.5VDC, 35mA standby maximum.
- Current: Standby 35mA + current required for each active output.
- Output Power: Active low outputs.
- Maximum Single Output Current: 50mA power-limited circuits 14VDC maximum.
- Maximum Combined Output Current: 400mA powerlimited circuits 14VDC maximum.
- Note: Output current must be deducted from either standby current or alarm current depending on the function of the output unless current is provided by a separate UL Listed Burglary / Signaling power limited power supply at 12 volts.
Home
