ZKTeco USA
ZKTECH
ZKTECH

READ BLUETOOTH CARD ON CELLPHO

KR500BT

READ BLUETOOTH CARD ON CELLPHO


You are currently shopping as a GUEST.

Login



Login




Back To Kit


Previous Page


Product Info Long

ZKTeco KR500BT - Indoor/Outdoor Mobile Phone Ready Smart-Card Reader with Bluetooth.

The KR500BT is a “mobile-ready” outdoor IP67-rated smartcard reader which additionally supports Bluetooth for smart-phone users preferring not to carry an actual smart card.

Features:
  • Technology - Contactless smart-card and Bluetooth Low Energy (BLE)
  • Supported card types - 13.56 MHz (contactless smart-card) and 2.4 GHz (BLE)
  • Mounting - Either narrow flat surfaces or single gang wall boxes
  • Indoor & Outdoor Installation - Electronics sealed in weather and tamper-resistant epoxy potting
  • Keypad - N/A
  • LED indicator - Blue, red, green, amber, and off
  • Audio indicator - Beep
  • Wiegand Inferface - Wiegand-Out port
  • Power Supply - +8 – 14V DC
  • IP-rating - 67
  • Operating Temperature - –40° F to 149° F (–40° C to +65° C)
  • Operating Humidity - 20% - 80%
  • KR503E Dimensions (H×W×D) - Mullion: 1.7" W × 4.7" H × 1.2" D, Switch Plate: 3" W × 5.1" H × 1.2" D
  • Certifications - FCC, ICC, CE
  • Current draw - 40 mA typical @ 12V DC, 195 mA peak
  • Read range - Up to 1.5 inches (38 mm)
  • Cabling - 24 AWG minimum, multi-conductor stranded with an overall foil shield

Product Documents

Product Data Sheet

KR500BT-Datasheet.pdf


This product is typically included with the following Kits (and items)

Standard Readers
info



ZKTECH

READ BLUETOOTH CARD ON CELLPHO

KR500BT

READ BLUETOOTH CARD ON CELLPHO


You are currently shopping as a GUEST.

Login



Login





Previous Page

Product Info Long

ZKTeco KR500BT - Indoor/Outdoor Mobile Phone Ready Smart-Card Reader with Bluetooth.

The KR500BT is a “mobile-ready” outdoor IP67-rated smartcard reader which additionally supports Bluetooth for smart-phone users preferring not to carry an actual smart card.

Features:
  • Technology - Contactless smart-card and Bluetooth Low Energy (BLE)
  • Supported card types - 13.56 MHz (contactless smart-card) and 2.4 GHz (BLE)
  • Mounting - Either narrow flat surfaces or single gang wall boxes
  • Indoor & Outdoor Installation - Electronics sealed in weather and tamper-resistant epoxy potting
  • Keypad - N/A
  • LED indicator - Blue, red, green, amber, and off
  • Audio indicator - Beep
  • Wiegand Inferface - Wiegand-Out port
  • Power Supply - +8 – 14V DC
  • IP-rating - 67
  • Operating Temperature - –40° F to 149° F (–40° C to +65° C)
  • Operating Humidity - 20% - 80%
  • KR503E Dimensions (H×W×D) - Mullion: 1.7" W × 4.7" H × 1.2" D, Switch Plate: 3" W × 5.1" H × 1.2" D
  • Certifications - FCC, ICC, CE
  • Current draw - 40 mA typical @ 12V DC, 195 mA peak
  • Read range - Up to 1.5 inches (38 mm)
  • Cabling - 24 AWG minimum, multi-conductor stranded with an overall foil shield

Product Documents

Product Data Sheet

KR500BT-Datasheet.pdf


This product is typically included with the following Kits (and items)

Standard Readers
info