Alula RE508X - Universal Hardwired-to-Wireless RF Alarm Signal Translator and Repeater Module (for All Brands, Residential).
The Alula RE508X is a universal hardwired-to-wireless translation device for supporting multiple sensor-panel combinations. In addition to being a translator, you may choose to use the RE508X as a wireless repeater to extend the range of installations from the control panel.
The RE508X translator/repeater is compatible with the DSC, Honeywell, Interlogix and 2GIG control panels and new/existing hardwired equipment. With the RE508X universal translator, you can add your existing hardwired security sensors using the 8 hardwired loops with end-of-line resistors. The device is UL compliant and it comes with the power supply and back-up battery included.
When mounting the RE508X translator, choose a location that is at least 5 feet from the control panel's receiver. Do NOT mount the translator in a metal can or on a metal surface. Verify adequate RF signal strength at the panel before permanently mounting. Continue by wiring the zones into the RE508X translator. Next, connect 12VDC output to powered zone, if any. Lastly, connect the power supply to the RE508X translator using either the supplied barrel connector or flying leads.
Features:
- Certified to UL1023, ULC1023
- Compatible with any hardwired sensors going to the various wireless panels
- 8 Hardwire loops with end-of-line resistor detection
- Unique wireless ID (or loop) for each zone
- Unique wireless ID for the device itself
- Transmit diversity for a long reliable range
- PIR powering (via external supply)
- External 12VDC power supply (Included)
- Device low battery detect
- Device tamper detect
- Selectable wireless panel compatibility
- Rechargeable backup battery
- Automatic zone polarity and end of line detection
- Battery backed 12VDC output for powered zones
- Cover tamper
- Compatible with 2GIG, DSC, GE Interlogix and Qolsys
Home
