ALULA
ALULA

CRYPTIX COMPATIBLE NANOMAX (IN

RE622

CRYPTIX COMPATIBLE NANOMAX (IN


You are currently shopping as a GUEST.

Login



Login




Back To Kit


Previous Page


Product Info Long

Alula RE622

The RE622 is a CryptiX-encrypted, small-sized, wireless door or window sensor. It is typically used to sense opening and closings of doors and windows, but can secure just about anything using its Strip & Stickâ„¢ external contact holes. It will alarm when the magnet is pulled away from the NanoMax or when the external contact is opened.

To enroll the RE622, begin by placing the panel into wireless enrollment mode and then sending an enrollment signal from the NanoMax sensor. Alternatively, the NanoMax sensor can be enrolled by scanning its bar code using the HeliLink app.

To install the RE622, begin by removing the adhesive paper and adhering the NanoMax and magnet on a door or window. Make sure to align the alignment marks on the NanoMax and magnet when mounting. Alternatively, NanoMax can be used with an external contact instead of the reed switch.

The 3M VHB Tape works great if the surface is properly prepared and firm pressure is applied for over 10 seconds. The RE622's wireless performance is optimized when mounted near the top of the door in a vertical orientation. The MetalMaxâ„¢ Please consider adding the NanoMax mounts (RE033-16) for better performance on metal and narrow mounting situations.

Product Features:
  • Transmits power at the full FCC limits, maximizing range
  • Support for an external contact
  • 1-inch magnet gap
  • Cover tamper
  • 6+ year battery life
  • Quick peel and press mounting
  • Small profile for a near invisible look
  • Most flexible magnet positioning in the industry
  • Strip & Stick external contact holes

Specifications:
  • Dimensions: 1.80 x 0.77 x 0.39 inches (4.6 x 2.0 x 1.0 cm)
  • Weight with Battery: 0.53 ounces (15 grams)
  • Mounting Fastener: 3M VHB Tape
  • Operating Temperature: 32 to 120°F (0 to 49°C)
  • Maximum Humidity: 85% non-condensing relative humidity
  • Frequency: 433.92 MHz
  • Replacement Battery: One Panasonic CR1632
  • Nominal Battery Life: 6 years
  • Battery Voltage: 3.0 VDC (Nominal), 2.62VDC (Low
  • Current Draw: 20 mA (Maximum), 0.5 uA (Quiescent)
  • Transmitted Indications: Cover Tamper, Low Battery, Supervision
  • Certification: UL634, ULC634, ETL, FCC, IC

Product Documents

Product Data Sheet

RE622-DataSheet.pdf


This product is typically included with the following Kits (and items)

Alula Essentials Home Sec
info

Alula Secure and Automate
info

Alula Secure Automate VIS
info

Wireless Devices
info

Security, Temp, Lock, Cam
info

alula - The Kitchen Sink
info



ALULA

CRYPTIX COMPATIBLE NANOMAX (IN

RE622

CRYPTIX COMPATIBLE NANOMAX (IN


You are currently shopping as a GUEST.

Login



Login





Previous Page

Product Info Long

Alula RE622

The RE622 is a CryptiX-encrypted, small-sized, wireless door or window sensor. It is typically used to sense opening and closings of doors and windows, but can secure just about anything using its Strip & Stickâ„¢ external contact holes. It will alarm when the magnet is pulled away from the NanoMax or when the external contact is opened.

To enroll the RE622, begin by placing the panel into wireless enrollment mode and then sending an enrollment signal from the NanoMax sensor. Alternatively, the NanoMax sensor can be enrolled by scanning its bar code using the HeliLink app.

To install the RE622, begin by removing the adhesive paper and adhering the NanoMax and magnet on a door or window. Make sure to align the alignment marks on the NanoMax and magnet when mounting. Alternatively, NanoMax can be used with an external contact instead of the reed switch.

The 3M VHB Tape works great if the surface is properly prepared and firm pressure is applied for over 10 seconds. The RE622's wireless performance is optimized when mounted near the top of the door in a vertical orientation. The MetalMaxâ„¢ Please consider adding the NanoMax mounts (RE033-16) for better performance on metal and narrow mounting situations.

Product Features:
  • Transmits power at the full FCC limits, maximizing range
  • Support for an external contact
  • 1-inch magnet gap
  • Cover tamper
  • 6+ year battery life
  • Quick peel and press mounting
  • Small profile for a near invisible look
  • Most flexible magnet positioning in the industry
  • Strip & Stick external contact holes

Specifications:
  • Dimensions: 1.80 x 0.77 x 0.39 inches (4.6 x 2.0 x 1.0 cm)
  • Weight with Battery: 0.53 ounces (15 grams)
  • Mounting Fastener: 3M VHB Tape
  • Operating Temperature: 32 to 120°F (0 to 49°C)
  • Maximum Humidity: 85% non-condensing relative humidity
  • Frequency: 433.92 MHz
  • Replacement Battery: One Panasonic CR1632
  • Nominal Battery Life: 6 years
  • Battery Voltage: 3.0 VDC (Nominal), 2.62VDC (Low
  • Current Draw: 20 mA (Maximum), 0.5 uA (Quiescent)
  • Transmitted Indications: Cover Tamper, Low Battery, Supervision
  • Certification: UL634, ULC634, ETL, FCC, IC

Product Documents

Product Data Sheet

RE622-DataSheet.pdf


This product is typically included with the following Kits (and items)

Alula Essentials Home Sec
info

Alula Secure and Automate
info

Alula Secure Automate VIS
info

Wireless Devices
info

Security, Temp, Lock, Cam
info

alula - The Kitchen Sink
info