Product Info Long
Napco Security SLE-MAXVI-CFB - Fire Dual Path Commercial Fire/Burglar 5G LTE-M Cellular and WiFi Alarm Communicator (Red Metal Enclosure, Powered by Control Panel, Verizon Network).
The StarLink MAX Series Sole/Dual-Path Commercial / Residential Fire alarm capture IP communicators are fully supervised, wireless digital two-way subscriber units. The SLE-MAXVI-CFB and SLE-MAXVI-CFBPS communicators operate on the Verizon network, the SLE-MAXAI-CFB and SLE-MAXAI-CFBPS on the AT&T network and all models utilize CAT-M1 technology. These devices support both Sole Path and Dual Path communication. Sole Path communication is cellular only and Dual Path communication is cellular and IP, which requires connection to the local network using the on-board Ethernet jack or via Wi-Fi using the optional UL 864 Certified SLE-WIFI-MODULE.
Features:
- Power limited output to the StarLink communicator PC board 12V input terminals
- Battery connection red and black flying leads
- Monitored battery charging and Active battery test circuits
- StarLink communicator trouble input (from StarLink PC-board PGM1 terminal to detect StarLink communicator trouble)
- Requires a sealed lead acid min 4AH / max 7AH battery for minimum 24-hour standby time (max charge current 200mA)
- Trouble relay output (C, N/O and N/C terminals) to wire to a panel zone dedicated to "Communicator Trouble" (dry contacts). Remove jumper "J2" isolate relay OUT1 common from ground
- Green AC ON LED visible from the exterior housing
- Yellow TROUBLE LED "D4" on PC board. Flashes signify: One flash: AC fail / brownout, Two flashes: Low battery, Three flashes: Charging circuit trouble, Four flashes: StarLink communicator trouble
Home
